General Guidelines for Efficient and Cost-Effective Results with 3D Scanners

3d scanners are some of the most beneficial new equipment that ever happened to the design and manufacturing industry. Used alongside 3d printers, they will ease production and raise the quality of results, regardless of the size of your facility or the specifics of the applications that you manage. With that said, any smart business owner still wants to capitalise on the advantages of the equipment without going overboard on costs. And if you’re such a business owner, here are some of the most important pointers that you can consider.


Check your resolution specs

One of the biggest misconceptions that persist about 3d scanning is that you need the highest possible resolution to get the best-quality scans. But this is not always the case. The necessary quality can be achieved with a low-resolution scanner, provided that the data that needs to be scanned can be captured perfectly. For instance, if you only need to scan the x-axis of a certain model, low specs will do more than enough.


Configure your scanner properly

There are also scanners that only need to be configured properly to deliver quality results. For example, if the scanned result always looks grainy, you may want to check how the equipment has been set up. Similarly, simple operational conditions such as the position of the scanner in relation to the source of light factors significantly into the whole process.


Fine-tune your processes

Speaking of processes, a holistic approach to the use of your 3d scanners in your design or manufacture cycle is necessary. If methodologies are not stacked in such a way that optimal efficiency is possible at the end of the cycle, you may want to revamp them. For example, if you start with creating the wireframe of the design and then move to prototyping before scanning but you consistently have to go back to redoing the wireframe, a better alternative would be to finalise the design and run iterations before moving to production. In this way, you don’t have to waste resources in going back and forth, and you have a better chance of delivering the required results faster.

Finally, get your whole team involved. Working with 3d scanners may take a lot of work off your whole facility, but it should not have to get in the way of communication. Specifically reach out to those who work closely with the scanners for their input, so that you can head off potential issues and ensure smooth sailing for your projects.


Post Tags
About Author: admin